��ݮ��Ƶ

Dr. Ali Tamijani is a Professor in the Department of Aerospace Engineering at ��ݮ��Ƶ. He received his Ph.D. in Engineering Mechanics from Virginia Tech in 2011 and was a Postdoctoral Research Associate in the Virginia Tech Aerospace and Ocean Engineering Department from 2011-2013.

Dr. Tamijani’s research has been focused on innovative light-weight and efficient structural designs using novel analysis techniques, robust optimization algorithms, coupled with advanced manufacturing processes. His work provides important tools for optimizing designs in many applications, including aerospace structures, biomedical devices, energy absorbers, heat exchangers, and acoustic insulation treatments.

Since joining Embry-Riddle in August 2013 Dr. Tamijani has spent three summers at AFRL as an Air Force Faculty Fellow exploring analytical methods for visualizing and identifying structural load paths and load flow and received the 2017 AFOSR Young Investigator Award on load-path based topology optimization. He collaborated with the Florida Department of Transportation on the design of composite bridge girder, worked with Boeing company on the structural integrity of stitched composite structures, and was Gulfstream Aerospace Corporation consulting faculty and research advisor from 2014-2016. Dr. Tamijani’s work on multiscale optimization in additive manufactured cellular microstructures received the 2019 NSF CAREER award. He is an Associate Editor of the Journal of Aerospace Science and Technology and received the 2020 University Outstanding Researcher of the Year Award.

Dr. Tamijani expanded the Aerospace Engineering graduate program in the Structures and Material track by developing three new graduate courses on Computational Mechanics, Structural Optimization, and Aeroelasticity. To further integrate his research methods and teaching activities, and broadly disseminating his research findings, he taught a graduate course on Aircraft Plates and Shells to Gulfstream engineers and developed two online graduate courses on Plates and Shells and Structural Optimization for ERAU Worldwide.

Academic Advising

Current Postdoc/Graduate Supervision

     Postdoc

• Zhelong He, Stress-based Optimization of 3D Printed Continuous Fiber Composites, Fall 2020-present

     PhD

• Kaela N. Barrett, Thesis Title: Design and Additive Manufacturing of Robust Thermoelastic Metamaterial Structures, Expected Graduation: Spring 2024.
• Zhichao Wang, Thesis Title: 3D strength-based optimization of lattice structures, Expected Graduation: Spring 2022.
• Ferrand, Jesus, Thesis Title: Design and fabrication of 3D coated continuous fiber composite structures, Expected Graduation: Spring 2025.

     MSc

• Benyang Hu (MSc), Thesis Title: Level Set Optimization of 3D Printed Continuous Fiber Composites, Expected Graduation: Spring 2022.

Past Postdoc/Graduate Supervision

     Postdoc

• Kaveh Gharibi, Load-path based Topology Optimization, 12/1/18-8/1/19.

     PhD

• Rossana Fernandes, Thesis Title: Design, Analysis and Experimental Evaluation of 3D Printed Variable Stiffness Structures, Summer 2021.
• Kaveh Gharibi, Thesis Title: Investigation of Load-path based Topology Optimization, Fall 2018, Recipient of 2018 Outstanding PhD Student.
• Vasileios Papapetrou, Thesis Title: Design Optimization and Computational Analysis of Advanced Composite Structures, Fall 2018

     MSc

• Lee Alacoque, Thesis Title: Topology Optimization and Analysis of Thermal and Mechanical Metamaterials, Summer 2020.
• Shajayra Patricia Velasco, Thesis Title: Macroscale Projection and Manufacturability of Oriented Homogenized Microstructures, Spring 2020.
• Aryslan Malik, Thesis Title: Experimental and Computational Aeroelastic Analysis of A 3D Printed Wing Structure, Spring 2019.
• Joel Hurley, Thesis Title: Design of Variable-Stiffness Composite Structures, Summer 2017, Recipient of 2016 Outstanding Graduate Student.
• Rossana Fernandes, Thesis Title: Vibration Analysis of Arbitrary Shaped Composite Structures, Spring 2016, Recipient of 2015 Outstanding Graduate Student.
• Scott Morrison, Thesis Title: Landing Gear Door Design Optimization using Response Surface Modeling, Fall 2015.

• University Outstanding Researcher of the Year Award, ��ݮ��Ƶ, 2020
• National Science Foundation CAREER Award, 2019
• NASA JPL Faculty Research Program Award, 2019
• College of Engineering Outstanding Researcher of the Year Award, ��ݮ��Ƶ, 2019
• Air Force Office of Scientific Research Young Investigator Program (YIP) Award, 2017
• Air Force Faculty Fellowship Award, 2014, 2015, and 2016
• Editorial Board of The Journal of Aerospace Science and Technology, 2014-Present
• Liviu Librescu Scholarship, Engineering Mechanics Department, Virginia Tech, 2011.
• Manual Stein Scholarship, Engineering Mechanics Department, Virginia Tech, 2009.
• Davenport Graduate Fellowship, Graduate school, Virginia Tech, 2007.

• Plates and Shells (AE 612) – Graduate

Gulfstream Aerospace Corporation

Aerospace Engineering Department, ��ݮ��Ƶ

Worldwide, ��ݮ��Ƶ

• Aeroelasticity (AE 618) – Graduate

Aerospace Engineering Department, ��ݮ��Ƶ

• Structural Optimization (AE 525) – Graduate

Aerospace Engineering Department, ��ݮ��Ƶ

Mechanical Engineering Department, ��ݮ��Ƶ

Worldwide, ��ݮ��Ƶ

• Mechanics of Structures: Variational and Computational Methods (AE 542) - Graduate

Aerospace Engineering Department, ��ݮ��Ƶ

• Aerospace Structures I  (AE 318) - Undergraduate

Aerospace Engineering Department, ��ݮ��Ƶ

• Aerospace Structures II  (AE 418) - Undergraduate

Aerospace Engineering Department, ��ݮ��Ƶ

Articles in Refereed Journals:

1. Wang, Z., & Tamijani, A. Y., “Computational Synthesis of Large-Scale Three-dimensional Heterogeneous Lattice Structures,” Aerospace Science and Technology, January 2022, 120, 107258, https://doi.org/10.1016/j.ast.2021.107258
   
2. Tamijani, A. Y., “Stress and stiffness-based topology optimization of two-material thermal structures,” Computers and Structures, 2021, 256, 106641, https://doi.org/10.1016/j.compstruc.2021.106641
3. Fernandes, R. R., & Tamijani, A. Y., “Design optimization of lattice structures with stress constraints,” Materials & Design, 2021, 110026, https://doi.org/10.1016/j.matdes.2021.110026
4. Fernandes, R. R., van de Werken, N., Koirala, P., Yap, T., Tamijani, A. Y., & Tehrani, M., “Experimental Investigation of Additively Manufactured Continuous Fiber Reinforced Composite Parts with Optimized Topology and Fiber Paths,” Additive Manufacturing, 2021, 102056, https://doi.org/10.1016/j.addma.2021.102056
5. Fernandes, R., Tamijani, A. Y., and Al-Haik M., “Mechanical characterization of additively manufactured fiber-reinforced composites,” Aerospace Science and Technology, 2021, 113, 106653, https://doi.org/10.1016/j.ast.2021.106653
6. Gharibi, K., and Tamijani, A. Y., “Load-Path-Based Topology Optimization of Two-Dimensional Continuum Structures,” AIAA Journal, 2021, 1-10. https://doi.org/10.2514/1.J059642
7. Alacoque, L, Watkins R. T., and Tamijani A. Y., “Stress-Based and Robust Topology Optimization for Thermoelastic Multi-Material Periodic Microstructures,” Computer Methods in Applied Mechanics and Engineering, 2021, 379, 113749, https://doi.org/10.1016/j.cma.2021.113749
8. Tamijani, A. Y., Velasco, P. S., and Alacoque, L., “Topological and Morphological Design of Additively-Manufacturable Spatially-Varying Periodic Cellular Solids,” Materials and Design, 2020, 196, 109155. https://doi.org/10.1016/j.matdes.2020.109155
9. Papapetrou, V. S., Patel, C., and Tamijani, A. Y., “Stiffness-Based Optimization Framework for the Topology and Fiber Paths of Continuous Fiber Composites,” Composites Part B: Engineering, 2020, 183, 107681. https://doi.org/10.1016/j.compositesb.2019.107681
10. Nematollahi, A., Hurley, J., Khanboluki, P., van de Werken, N., Tamijani, A. Y., and Tehrani, M., “Design considerations and modeling of fiber reinforced 3D printed parts,” Composites Part B, 2019, 160, 684-692. https://doi.org/10.1016/j.compositesb.2018.12.094
11. Tamijani, A. Y., Hurley, J., and Gharibi, K., “Determination of load paths in plates and shells,” Thin-Walled Structures, 2018, 127, 646-653. https://doi.org/10.1016/j.tws.2018.02.031
12. Papapetrou, V. S., Tamijani, A. Y., Brown, J., and Kim, D., “Design Optimization of Hybrid FRP/RC Bridge,” Applied Composite Materials, 2018, 1-22. https://doi.org/10.1007/s10443-018-9691-3
13. Tamijani, A. Y., Gharibi, K., Kobayashi, M. H., and Kolonay, R. M., “Load Paths Visualization In Plane Elasticity Using Load Function Method,” International Journal of Solids and Structures, 2018, 135, 99-109. https://doi.org/10.1016/j.ijsolstr.2017.11.013
14. Tamijani, A. Y., Mulani, S., and Kapania, R. K., “A Multilevel Framework for Decomposition-Based Reliability Optimization,” Advances in Aircraft and Spacecraft Science, 2017, 4 (4), 467-486. https://doi.org/10.12989/aas.2017.4.4.467
15. Fernandes, R. and Tamijani, A. Y., “Flutter Analysis of Laminated Curvilinear-Stiffened Plates,” AIAA Journal, 2017, 55 (3), 998-1011. https://doi.org/10.2514/1.J055021
16. Papapetrou, V., Tamijani, A. Y., and Kim, D., “Preliminary Wing Study of General Aviation Aircraft with Stitched Composite Panels,” Journal of Aircraft, 2017, 54, Special Section on Cranked Arrow Wing Aerodynamics Project International II/F-16XL, 704-715. https://doi.org/10.2514/1.C033884
17. Tamijani, A. Y., Mulani, S., and Kapania, R. K., “A Framework Combining Meshfree Analysis and Adaptive Kriging for Optimization of Stiffened Panels,” Structural and Multidisciplinary Optimization, 2014, 49 (4), 577-594. https://doi.org/10.1007/s00158-013-0993-7
18. Tamijani, A. Y. and Kapania, R. K., “A Chebyshev Ritz Approach to Buckling and Vibration of Curvilinearly-Stiffened Plate,” AIAA Journal, 2012, 50 (5), 1007-1018. https://doi.org/10.2514/1.J050042
19. Tamijani, A. Y. and Kapania, R. K., “Vibration Analysis of Curvilinearly-Stiffened Functionally Graded Plate Using Element Free Galerkin Method,” Mechanics of Advanced Materials and Structures, 2012, 19,100-108. https://doi.org/10.1080/15376494.2011.572240
20. Tamijani, A. Y. and Kapania, R. K., “Random Response Analysis of Curvilinearly-Stiffened Plate Using Element Free Galerkin Method,” Journal of Aircraft, 2011, 48 (6), 1856-1863. https://doi.org/10.2514/1.C031132
21. Tamijani, A. Y. and Kapania, R. K., “Buckling and Static Analysis of Curvilinearly Stiffened Plates Using Meshfree Method,” AIAA Journal, 2010, 48 (12), 2739-2751. https://doi.org/10.2514/1.43917
22. Tamijani, A. Y. and Kapania, R. K., “Vibration of Plate with Curvilinear Stiffeners Using Meshfree Method,” AIAA Journal, 2010, 48 (8), 1569-1581. https://doi.org/10.2514/1.43082
23. Tamijani, A. Y., McQuigg, T. and Kapania, R. K., “Free Vibration Analysis of Curvilinearly-Stiffened Plates and Experimental Validation,” Journal of Aircraft, 2010, 47 (1), 192-200. https://doi.org/10.2514/1.44613
24. Mirzaeifar, R., Bahai, H., Aryana, F., and Tamijani, A. Y., “Optimization of the Dynamic Characteristics of Composite Plates Using an Inverse Approach,” Journal of Composite Material, 2007, 41 (26), 3091-3108 (Journal of Composite Materials most frequently read articles, 2008). https://doi.org/10.1177/0021998307082178
25. Aryana, F., Bahai, H., Mirzaeifar, R., and Tamijani, A. Y., “Modification of Dynamic Characteristics of FGM Plates with Integrated Piezoelectric Layers Using First- and Second-order Approximations,” International Journal for Numerical Methods in Engineering, 2006, 70 (12), 1409-1429. https://doi.org/10.1002/nme.1927